Msan HP8000 Series Multiplexer

Product Description

Product Overview

MSAN HP8000 Series Product Catalog

1. HP8000 family Introduction

HP8000-5/8/14 is a cost effective & versatile Multi Service Access Node (MSAN) solution  that provides a unique set of capabilities enabling service providers to deliver the most competitive triple play service offerings. It enables carriers to provide high bandwidth service and voice service for customers and it can smoothly migrate to IP based next-generation applications while continuing to offer traditional TDM based services to customers.
 The HP8000-5/8/14 supports a range of technologies such as POTS, ADSL2/ADSL2+, VDSL2, SHDSL(EFM) which allows the service providers to offer highly interactive and bandwidth intensive applications. HP8000-5/8/14 acts as a traditional TDM based DLC, IPDSLAM, Media Gateway platform rolled into one.

HP8000-5V is a new  compact design (5 Rack Units ETSI height) MSAN platform which  can provide GPON, VDSL, IMS access, VoIP media gateway, IP-DSLAM applications to serve varied subscriber needs thus enabling carriers to provide high bandwidth data and voice services for customers and smoothly migrate to IP based next-generation applications while continuing to offer traditional TDM based services.

HP8000-5V

 

1. Product Highlights

1. Versatile Customer Interfaces: ADSL2+, VDSL2, POTS, E1, SHDSL(EFM),GPON OLT interface (only HP8000-5V supports)
2. Transport/Trunk: GE, E1
3. Supports Combo Subscriber Port: IVD (Integrated ADSL2+ & POTS Module)
4. Versatile Solution for TDM/IP Based Applications
5. Seamless Migration from V5/AN to VoIP/AG
6. Redundant Control, Switching & Power Modules with Hot redundancy. (All active calls are preserved)
7. Up to 28 Mbps capacity per DSL subscriber
8. Inherits QoS and other functionality from proven iAN8K B1000
9. Built-in loop test for voice-band and broadband
10. ETSI 300mm depth compliant
11. CE, FCC,VCCI compliant
12. Cascading architecture: up to 3 shelves Cascading

Management capabilities

1. NMS 4000 OMC-A
2. North Bound Interface (NBI)
3. SNMP based network management.

1. Applications

 

1. Traditional services
   • Offers DLC/AN Services like POTS
2. IP based Broadband Triple-play services
   • High Speed Internet Access via xDSL (ADSL/ADSL2/ADSL2+, VDSL2)
   • It can also offer Voice over IP using xDSL, IPTV applications using xDSL and Interactive applications e.g. games using xDSL.
3. VoIP Services
   • VoIP services using IP based voice protocols - H.248/MEGACO/SIP.
   • Supports basic service, Supplementary service and Centrex service based on Soft Switch platform
   • Supports Voice, FAX, Modem, and E1 over IP.
   • Bi-directionally convert voice formats between PCM payload and IP-based G.711, G.723, G.726 or G.729 payload.
   • Echo-cancellation mechanism. Voice Activation Detection (VAD).
   • Comfort Noise Generation (CNG).

4. Features

The platform provides a wide range of customer interfaces with unique flexibility in network design:

1. SIP ,H.248/MEGACO VoIP-based Basic services
2. Supplementary services and Centrex services
3. T.30 ,T.38 Fax Relay over IP
4. PSTN interface: V5.2/VoIP
5. E1 based network interface for TDM transport, support up to 16 E1
6. Hot-redundant CSM, hot-redundant POW, 2 clock input and 2 clock output
7. State of the art proven Netman 4000 OMC-A EMS
8. ADSL2+&VDSL2&SHDSL support as per ITU-T standards
9. Annex A/ Annex B/Annex L/Annex M IP-DSLAM
10. IPTV applications using by xDSL

1. Specifications

	HP8000-5V	HP8000-5	HP8000-8	HP8000-14
Chassis Size	5RU	5RU	8RU	14RU
Modular Architecture	40 to 192 ports per node	64 to 320 ports per node	64 to 640 ports per node	64 to 3744 ports per node
Slot	12	12	17	21
System CAPACITY	Single Chassis - Up to 192 VDSL2 combo ports   Single Chassis - Up to 40 GPON ports   Single Chassis - 2*10GE + 2*1GE uplink per CSM card	Single Chassis - Up to 320 ADSL2+, POTS (VoIP or V5) ports Single Chassis - Up to 160 VDSL2, IVD (ADSL2+ POTS combo) Single Chassis - Up to 120 SHDSL(EFM)	Single Chassis - Up to 640 ADSL2+, POTS (VoIP or V5) ports Single Chassis - Up to 320 VDSL2, IVD (ADSL2+ POTS combo) Single Chassis - Up to 240 SHDSL(EFM)	Single Chassis - Up to 1248 POTS (VoIP or V5) Single Chassis - Up to 832 ADSL2+ ports Single Chassis - Up to 416 IVD (ADSL2+ POTS combo) Single Chassis - Up to 416 VDSL2 Single Chassis - Up to 312 SHDSL(EFM) Cascading Chassis - Up to 3744 POTS (VoIP or V5) Cascading Chassis - Up to 2496 ADSL2+ ports Cascading Chassis - Up to 1248 IVD(ADSL2+ POTS combo) Cascading Chassis - Up to 1248 VDSL2 Cascading Chassis - Up to 936 SHDSL(EFM)
PHYSICAL	Dimensions:              482.6mm (W) x 260mm (D) x 221mm (H) Weight :            9.2 Kg	Dimension: 440mm (W) x 260mm (D) x 219mm (H) Weight: 8.8 Kg	Physical dimension: 440mm (W) x 260mm (D) x 355mm (H) Weight: 10 Kg	Physical dimension: 483mm (W) x 320mm (D) x 620mm (H) Weight: 16.4 Kg
System power consumption	< 650 watts Typical power consumption: 450 watts	< 500 watts Typical power consumption: 350 watts	< 500 watts Typical power consumption: 350 watts	< 1400 watts Typical power consumption: 800 watts

Reliability and High Availability

1. Hot-redundant CSM, hot-redundant POW, Four clock input, and Dual power input)

TDM Network Interface Modules

1. E1M

IP Network Interface Modules

1. CSM, VPM

Signaling Protocols

1. V5.2, H.248 v2, SIP

Media Processing

1. G.711, G.729 A/B, G.723.1,G.726-32, RFC2833
2. Echo cancellation based on ITU-T G.168
3. Voice Activity Detection (VAD) and Comfort Noise Generation (CNG)
4. RTP/RTCP

Fax/Modem

1. T.30 ,T.38 Fax and Modem

Layer 2 Capacity & Protocols

1. TR101 compliance
2. Wire-speed switching engine, 16K forwarding table
3. Rapid Spanning tree (IEEE 802.1 W)
4. VLAN (IEEE 802.1Q/802.1ad)
5. IGMP snooping (v1/v2/v3),  IGMP proxy (v1/v2/v3)
6. Sophisticated QoS (802.1p, IP TOS, DSCP, flow based classification, shaping etc.)
7. Link aggregation, Port mirroring, MAC filter
8. Support up to 8*1GE interface

IP-xDSL Interfaces

1. ANSI T1.413,  G.Lite (ITU-T G.992.2)
2. ADSL/ADSL2/ADSL2+ (ITU-T G.992.1/G.992.3/G.992.5)
3. VDSL2 (ITU-T G.993.2 - Profile 8a/8b/8c/8d, 12a/12b, 17a)
4. SHDSL.bis according to ITU-T G.991.2,  Annex A, Annex B, Annex F, Annex G, EFM  according to IEEE 802.3ah
5. Encapsulation:
6. RFC2684 - Multi-protocol encapsulation over AAL5
7. SHDSL.bis according to ITU-T G.991.2, Annex A, Annex B, Annex F, Annex G, EFM according to IEEE 802.3ah.

PASSIVE OPTICAL NETWORK (PON) FEATURES

1. ITU - T standards based for PON interface
2. TR-101 compliant solution for FTTx OLT applications
3. Logical splitter ratio is up to 1:64
4. Logical reach is up to 60km
5. Support uplink FEC, downlink FEC(Forward Error Correction)
6. ONU identifier authentication by serial number (SN)
7. Bandwidth allocation mechanism
8. 5 types of T-CONT bandwidth
9. Static / Dynamic Bandwidth Allocation
10. GPON feature parameter
11. 4096 port-IDs per GPON MAC (Downstream and Upstream)
12.  1024 Alloc -IDs per GPON MAC (Upstream )

Remote Testing

• • Remote line testing with metallic loop for subscriber lines, Line card testing & Subscriber telephone tests
  • SELT/DELT

System Management

• • GUI based network management platform, SNMP,
  • XML based northbound interface.

TDM Interoperability
Interoperates with all industry standard PSTN switches as per ITU-T specifications, including but not limited to Alcatel-Lucent, Huawei Nokia-Siemens, Ericsson, NEC, Fujitsu, ZTE and. Datang
VoIP Interop ability
Interoperates with mSwitch and 3rd party soft-switch platforms that comply with IETF/ITU-T standards, including but  not limited to Alcatel-Lucent, Huawei, ZTE, Nokia-Siemens, Sonus, Nortel, Comverse, Teklec, OKI, Teligent, and Broadsoft,.
Platform Operating Power/Voltage

• • Power supply: -48V DC power module with over current/surge protection
  • DC Input: -40V to -60V DC
  • Power supply feature:

Supports 1+1 hot redundancy, Reverse polarity
Protection and Lightning Protection.

• • Power failure alarms:

-48V power supply alarm, +3.3V powers supply/Ringer alarm
Regulatory Compliance

• • EMI/EMC:

CE Class A, VCCI Class A, FCC part 15, sub part B, class A

• • Safety:

IEC 60950 UL 60950 EN 60950

• • Surge/Lighting protection:

ITU-T K.20, YDT1082-2000

• • RoHS Compliant

Environmental

• • Operating Environment:

System Ambient Temperature:
0° C to +45° C, short term: -10° C to +55° C Humidity: 5 to 85%, short term: 5 to 95%
Altitude: 60 meters below to 3,962 meters above sea level Acoustical Noise: ≤ 75 dBA
Dust Density: 3 x104 per cubic meter (diameter > 5µm)

• • Storage Environment:

System Ambient Temperature:
-40° C to 70° C
Humidity: 75 for maximum
Altitude: 60 meters below to 3,962 meters above sea level Dust Density: 3 x10⁴ per cubic meter (diameter > 5µm)
REGULATORY COMPLIANCE

• • EMI/EMC:

CE Class A, VCCI Class A, FCC part 15, sub part B, class A

• • Safety:

IEC 60950 UL 60950 EN 60950

• • Surge/Lighting protection:

ITU-T K.20, YDT1082-2000

• • RoHS Compliant

TEC

• • GR No. GR/SW/LMG- 001/01 Jan 2009

IEEE
IEEE 802.3ad Link Aggregation  LACP
IEEE 802.3x Flow Control
IEEE 802.3z Gigabit Ethernet
IEEE 802.1q VLAN Tagging
IEEE 802.1p Traffic Prioritization
IEEE 802.1d Spanning Tree Protocol
IEEE 802.1w Rapid Spanning Tree Protocol
IEEE 802.1X Port Base Access Control
IEEE 802.3ah GEPON Standard
ITU-T H.248 Media GateControl Protocol
ITU-T
ITU-T G.991.2 G.SHDSL Standard
ITU-T G.992.1 ADSL Standard
ITU-T G.992.2 ADSL.lit Standard
ITU-T G.992.3 ADSL2 Standard
ITU-T G.992.5 ADSL2+ Standard
ITU-T G.993.1 VDSL Standard
ITU-T G.993.2 VDSL2 Standard
ITU-T G.994.1 ADSL Handshake
ITU-T G.984 GPON Standard
IETF RFC
RFC 1112 Multicasting / IGMP snooping MLD V1/V2 Proxy, Snooping
RFC 1155 MIB
RFC 1157 SNMP
RFC 1213 MIB-II
RFC 2011 SNMPv2
RFC 2131 DHCP Relay
RFC 2684 Bridge over ATM
RFC 2819 Remote Network Monitoring MIB
RFC 3022 Traditional NAT
RFC 3619 Ethernet Automatic Protection Switching
ANSI
ANSI T1.413 Interface between network and ustomer installation ADSL
ANSI T1.424 Interface between network and customer installation VDSL